13552535826
联系人:郭经理
手机:13552535826
QQ:2215513710
地址:北京市石景山区八大处路49号院4号楼
图20所示为200B-10/8型两段单动立式复盛空压机,其生 产量为10公尺³/分,事情压力为8计示年夜气压,并借联轴节18由 电念头直接驱动。
这种空气紧缩机重要的基础零件为整铸的箱形曲轴箱1,其 两侧有为安装曲轴用的台肩状搪孔19,和两对为嵌进气缸织套找 正中央的凸绿,曲轴箱壁与气缸套间的空地空闲为洪水寒却气缸用 的水套。
曲4轴7由嵌在专门的分别支座20上的两对滚珠轴承所支承。 把分别支座固定在曲轴箱两头的孔口19上,即可断定曲轴在曲轴箱内的地位。
由曲轴通迸连杆6和浮功的活塞销21把动作通报给活塞4和5。 主动动作的环形一平板的吸气阀和排气阀10和11安装在气 缸盖8和9的端面上。
出产量的调剂是两段的(即为额定出产量 的100,0%),由专门的压力调剂器17经由过程吸气阀的过滤器装配入行调剂。
经由第一段以后的紧缩空气在管式圆柱形寒却器12中 寒却,此寒却器安装在曲轴箱的后面。
连杆的轴承和活寨的浮销由齿轮油泵用经由过滤的油润滑。
齿轮油泵由空气紧缩机的曲轴驱动。
气缸衬套的接触面借空气紧缩机的连杆由曲轴箱溅油来入行润滑。
NAME | COMPONENT | DURATION | 0 ms | 10 ms | 20 ms | 30 ms | 40 ms | 50 ms |
---|---|---|---|---|---|---|---|---|
Bootstrap | Timer | 15.71 ms | ||||||
Routing | Timer | 0.04 ms | ||||||
Controller | Timer | 36.94 ms | ||||||
Controller Constructor | Timer | 13.81 ms | ||||||
Query | Database | 0.35 ms | ||||||
Query | Database | 0.24 ms | ||||||
Query | Database | 0.26 ms | ||||||
Query | Database | 0.27 ms | ||||||
Query | Database | 0.35 ms | ||||||
Query | Database | 0.37 ms | ||||||
Query | Database | 0.24 ms |
Time | Query String |
---|---|
0.34 ms | SELECT * FROM `dr_1_share_index` WHERE `id` = 527 |
0.24 ms | SELECT * FROM `dr_1_article` WHERE `id` = 527 |
0.26 ms | SELECT * FROM `dr_1_article_data_0` WHERE `id` = 527 |
0.27 ms | SELECT * FROM `dr_1_article_category_data` WHERE `id` = 527 |
0.34 ms | SELECT * FROM `dr_1_article` WHERE `catid` = 15 AND `status` = 9 AND `id` < 527 ORDER BY `id` desc LIMIT 1 |
0.37 ms | SELECT * FROM `dr_1_article` WHERE `catid` = 15 AND `status` = 9 AND `id` > 527 ORDER BY `id` asc LIMIT 1 |
0.24 ms | SELECT * FROM `dr_1_article` WHERE `dr_1_article`.`status` = 9 AND `dr_1_article`.`catid` = 15 ORDER BY `dr_1_article`.`updatetime` DESC LIMIT 10 |
模板 | 路径 |
---|---|
article_article.html | /www/wwwroot/www.010fusheng.com/template/pc/default/home/article_article.html |
head.html | /www/wwwroot/www.010fusheng.com/template/pc/default/home/head.html |
searchBox.html | /www/wwwroot/www.010fusheng.com/template/pc/default/home/searchBox.html |
footer.html | /www/wwwroot/www.010fusheng.com/template/pc/default/home/footer.html |
模板 | 提示 |
---|---|
article_article.html | 由于模板文件[/www/wwwroot/www.010fusheng.com/template/pc/default/home/article/article_article.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.010fusheng.com/template/pc/default/home/article_article.html] |
head.html | 由于模板文件[/www/wwwroot/www.010fusheng.com/template/pc/default/home/article/head.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.010fusheng.com/template/pc/default/home/head.html] |
searchBox.html | 由于模板文件[/www/wwwroot/www.010fusheng.com/template/pc/default/home/article/searchBox.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.010fusheng.com/template/pc/default/home/searchBox.html] |
footer.html | 由于模板文件[/www/wwwroot/www.010fusheng.com/template/pc/default/home/article/footer.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.010fusheng.com/template/pc/default/home/footer.html] |
id | '527' |
catid | '15' |
title | '有曲轴箱和嵌进衬套、无十字头的立式空气紧缩' |
thumb | '' |
keywords | '有,曲,轴箱,和,嵌进,衬套,、,无,十字头,的,图,' |
description | '图20所示为200B-10/8型两段单动立式复盛空压机,其生 产量为10公尺/分,事情压力为8计示年夜气压,并借联轴节18由 电念头直接驱动。 这种空气紧缩机重要的基础零件为整铸的箱形曲轴' |
hits | '118' |
uid | '1' |
author | '未知' |
status | '9' |
url | '/baike/527.html' |
link_id | '0' |
tableid | '0' |
inputip | '' |
inputtime | '2019-04-23 10:19:51' |
updatetime | '2019-04-23 10:19:51' |
displayorder | '113' |
filename | '' |
shorttitle | '' |
myflag | array ( ) |
content | '<p>图20所示为200B-10/8型两段单动立式复盛空压机,其生 产量为10公尺³/分,事情压力为8计示年夜气压,并借联轴节18由 电念头直接驱动。</p><p>这种空气紧缩机重要的基础零件为整铸的箱形曲轴箱1,其 两侧有为安装曲轴用的台肩状搪孔19,和两对为嵌进气缸织套找 正中央的凸绿,曲轴箱壁与气缸套间的空地空闲为洪水寒却气缸用 的水套。</p><p style="text-align: center;"><img alt="立体式空气压缩机" src="2018/1228/1111.jpg" /></p><p>曲4轴7由嵌在专门的分别支座20上的两对滚珠轴承所支承。 把分别支座固定在曲轴箱两头的孔口19上,即可断定曲轴在曲轴箱内的地位。</p><p>由曲轴通迸连杆6和浮功的活塞销21把动作通报给活塞4和5。 主动动作的环形一平板的吸气阀和排气阀10和11安装在气 缸盖8和9的端面上。</p><p>出产量的调剂是两段的(即为额定出产量 的100,0%),由专门的压力调剂器17经由过程吸气阀的过滤器装配入行调剂。</p><p>经由第一段以后的紧缩空气在管式圆柱形寒却器12中 寒却,此寒却器安装在曲轴箱的后面。</p><p>连杆的轴承和活寨的浮销由齿轮油泵用经由过滤的油润滑。</p><p>齿轮油泵由空气紧缩机的曲轴驱动。</p><p>气缸衬套的接触面借空气紧缩机的连杆由曲轴箱溅油来入行润滑。</p>' |
tag | '有,曲,轴箱,和,嵌进,衬套,、,无,十字头,的,图,' |
kws | array ( '有' => 'http://www.010fusheng.com/article/search/keyword-%E6%9C%89.html', '曲' => 'http://www.010fusheng.com/article/search/keyword-%E6%9B%B2.html', '轴箱' => 'http://www.010fusheng.com/article/search/keyword-%E8%BD%B4%E7%AE%B1.html', '和' => 'http://www.010fusheng.com/article/search/keyword-%E5%92%8C.html', '嵌进' => 'http://www.010fusheng.com/article/search/keyword-%E5%B5%8C%E8%BF%9B.html', '衬套' => 'http://www.010fusheng.com/article/search/keyword-%E8%A1%AC%E5%A5%97.html', '、' => 'http://www.010fusheng.com/article/search/keyword-%E3%80%81.html', '无' => 'http://www.010fusheng.com/article/search/keyword-%E6%97%A0.html', '十字头' => 'http://www.010fusheng.com/article/search/keyword-%E5%8D%81%E5%AD%97%E5%A4%B4.html', '的' => 'http://www.010fusheng.com/article/search/keyword-%E7%9A%84.html', '图' => 'http://www.010fusheng.com/article/search/keyword-%E5%9B%BE.html', ) |
tags | array ( ) |
prev_page | array ( 'id' => '526', 'catid' => '15', 'title' => '空气紧缩机的指示功率和电功机的功率', 'thumb' => '', 'keywords' => '空气,紧缩机,的,指示,功率,和,电功机,空压机,', 'description' => '空压机所要求的功率,可以依据在复盛空压机内所产生 的理论进程用计算的方式来断定(当以等温顺尽暖紧缩计算时, 需对现实轮回加以恰当的修改),或用试验的方决根锯实验空气 紧', 'hits' => '130', 'uid' => '1', 'author' => '未知', 'status' => '9', 'url' => 'http://www.010fusheng.com/baike/526.html', 'link_id' => '0', 'tableid' => '0', 'inputip' => '', 'inputtime' => '1555984401', 'updatetime' => '1555984401', 'displayorder' => '113', 'filename' => '', 'shorttitle' => '', 'myflag' => '', ) |
next_page | array ( 'id' => '528', 'catid' => '15', 'title' => '空压机维修专用锤的使用方式', 'thumb' => '', 'keywords' => '空压机,维修,专用,锤,的,使用,方式,锤子,俗称,', 'description' => '锤子俗称榔头,是校直、鉴削和装卸零件、拆卸复盛空压机零件等操纵中必不成少的蔽击工其。 锤子由锤头和木柄两部门构成,如下图所示。 锤子的种类一般分为硬头锤子和软头锤子', 'hits' => '124', 'uid' => '1', 'author' => '未知', 'status' => '9', 'url' => 'http://www.010fusheng.com/baike/528.html', 'link_id' => '0', 'tableid' => '0', 'inputip' => '', 'inputtime' => '1556036630', 'updatetime' => '1556036630', 'displayorder' => '113', 'filename' => '', 'shorttitle' => '', 'myflag' => '', ) |
_inputtime | '1555985991' |
_updatetime | '1555985991' |
_myflag | '' |
meta_title | '有曲轴箱和嵌进衬套、无十字头的立式空气紧缩_知识百科_技术中心_复盛空压机(华北)总代理' |
meta_keywords | '有,曲,轴箱,和,嵌进,衬套,、,无,十字头,的,图' |
meta_description | '图20所示为200B-10/8型两段单动立式复盛空压机,其生 产量为10公尺/分,事情压力为8计示年夜气压,并借联轴节18由 电念头直接驱动。 这种空气紧缩机重要的基础零件为整铸的箱形曲轴' |
cat | array ( 'id' => '15', 'tid' => '1', 'pid' => '9', 'mid' => 'article', 'pids' => '0,9', 'name' => '知识百科', 'dirname' => 'baike', 'pdirname' => 'jishu/', 'child' => 0, 'childids' => 15, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => ' ', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '知识百科', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'index_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '15', ), 'is_post' => 1, 'url' => '/baike', 'total' => '-', 'field' => array ( ), ) |
top | array ( 'id' => '9', 'tid' => '1', 'pid' => '0', 'mid' => 'article', 'pids' => '0', 'name' => '技术中心', 'dirname' => 'jishu', 'pdirname' => '', 'child' => 1, 'childids' => '9,8,15,16,17,19', 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '技术中心', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'list_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '9', 1 => '8', 2 => '15', 3 => '16', 4 => '17', 5 => '19', ), 'is_post' => 0, 'url' => '/jishu', 'total' => '-', 'field' => array ( ), ) |
pageid | 1 |
params | array ( 'catid' => '15', ) |
parent | array ( 'id' => '9', 'tid' => '1', 'pid' => '0', 'mid' => 'article', 'pids' => '0', 'name' => '技术中心', 'dirname' => 'jishu', 'pdirname' => '', 'child' => 1, 'childids' => '9,8,15,16,17,19', 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '技术中心', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'list_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '9', 1 => '8', 2 => '15', 3 => '16', 4 => '17', 5 => '19', ), 'is_post' => 0, 'url' => 'http://www.010fusheng.com/jishu', 'total' => '-', 'field' => array ( ), ) |
markid | 'module-article-15' |
related | array ( 8 => array ( 'id' => '8', 'tid' => '1', 'pid' => '9', 'mid' => 'article', 'pids' => '0,9', 'name' => '维修保养', 'dirname' => 'weixiu', 'pdirname' => 'jishu/', 'child' => 0, 'childids' => 8, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => ' ', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '空压机维修保养', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'index_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '8', ), 'is_post' => 1, 'url' => 'http://www.010fusheng.com/weixiu', 'total' => '-', 'field' => array ( ), ), 15 => array ( 'id' => '15', 'tid' => '1', 'pid' => '9', 'mid' => 'article', 'pids' => '0,9', 'name' => '知识百科', 'dirname' => 'baike', 'pdirname' => 'jishu/', 'child' => 0, 'childids' => 15, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => ' ', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '知识百科', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'index_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '15', ), 'is_post' => 1, 'url' => 'http://www.010fusheng.com/baike', 'total' => '-', 'field' => array ( ), ), 16 => array ( 'id' => '16', 'tid' => '1', 'pid' => '9', 'mid' => 'article', 'pids' => '0,9', 'name' => '常见问题', 'dirname' => 'wenti', 'pdirname' => 'jishu/', 'child' => 0, 'childids' => 16, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => ' ', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '常见问题', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'index_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '16', ), 'is_post' => 1, 'url' => 'http://www.010fusheng.com/wenti', 'total' => '-', 'field' => array ( ), ), 17 => array ( 'id' => '17', 'tid' => '1', 'pid' => '9', 'mid' => 'article', 'pids' => '0,9', 'name' => '选购指南', 'dirname' => 'xuangou', 'pdirname' => 'jishu/', 'child' => 0, 'childids' => 17, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => ' ', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '选购指南', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'index_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '17', ), 'is_post' => 1, 'url' => 'http://www.010fusheng.com/xuangou', 'total' => '-', 'field' => array ( ), ), 19 => array ( 'id' => '19', 'tid' => '1', 'pid' => '9', 'mid' => 'article', 'pids' => '0,9', 'name' => '新闻中心', 'dirname' => 'xinwen', 'pdirname' => 'jishu/', 'child' => 0, 'childids' => 19, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => ' ', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 1, 'seo' => array ( 'list_title' => '新闻中心', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list_article.html', 'category' => 'index_article.html', 'search' => 'search.html', 'show' => 'article_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '9', 'catids' => array ( 0 => '19', ), 'is_post' => 1, 'url' => 'http://www.010fusheng.com/xinwen', 'total' => '-', 'field' => array ( ), ), ) |
urlrule | '/baike/527_[page].html' |
fix_html_now_url | '' |
my_web_url | 'http://www.010fusheng.com/baike/527.html' |
get | array ( 'c' => 'show', 'id' => '527', 'm' => 'index', ) |
App.php | APPPATH/Config/App.php |
Autoload.php | APPPATH/Config/Autoload.php |
Cache.php | APPPATH/Config/Cache.php |
Cache.php | APPPATH/Library/Cache.php |
Checkbox.php | APPPATH/Field/Checkbox.php |
CodeIgniter.php | APPPATH/Extend/CodeIgniter.php |
Constants.php | APPPATH/Config/Constants.php |
Content.php | APPPATH/Model/Content.php |
ContentSecurityPolicy.php | APPPATH/Config/ContentSecurityPolicy.php |
Cookie.php | APPPATH/Config/Cookie.php |
Database.php | APPPATH/Config/Database.php |
Date.php | APPPATH/Field/Date.php |
Exceptions.php | APPPATH/Config/Exceptions.php |
Exceptions.php | APPPATH/Extend/Exceptions.php |
Field.php | APPPATH/Library/Field.php |
File.php | APPPATH/Field/File.php |
Filters.php | APPPATH/Config/Filters.php |
Helper.php | APPPATH/Core/Helper.php |
Hooks.php | APPPATH/Core/Hooks.php |
Init.php | APPPATH/Init.php |
Input.php | APPPATH/Library/Input.php |
Kint.php | APPPATH/Config/Kint.php |
Lang.php | APPPATH/Library/Lang.php |
Logger.php | APPPATH/Config/Logger.php |
Member.php | APPPATH/Model/Member.php |
Model.php | APPPATH/Core/Model.php |
Module.php | APPPATH/Extend/Home/Module.php |
Modules.php | APPPATH/Config/Modules.php |
Paths.php | APPPATH/Config/Paths.php |
Phpcmf.php | APPPATH/Core/Phpcmf.php |
Request.php | APPPATH/Extend/Request.php |
Router.php | APPPATH/Library/Router.php |
Routes.php | APPPATH/Config/Routes.php |
Security.php | APPPATH/Library/Security.php |
Seo.php | APPPATH/Library/Seo.php |
Service.php | APPPATH/Core/Service.php |
Services.php | APPPATH/Config/Services.php |
Show.php | APPPATH/Control/Show.php |
Text.php | APPPATH/Field/Text.php |
Textarea.php | APPPATH/Field/Textarea.php |
Toolbar.php | APPPATH/Config/Toolbar.php |
Ueditor.php | APPPATH/Field/Ueditor.php |
UserAgents.php | APPPATH/Config/UserAgents.php |
Version.php | FCPATH/My/Config/Version.php |
View.php | APPPATH/Config/View.php |
View.php | APPPATH/Core/View.php |
View.php | APPPATH/Extend/View.php |
cache.php | /www/wwwroot/www.010fusheng.com/cache/config/cache.php |
custom.php | /www/wwwroot/www.010fusheng.com/config/custom.php |
database.php | /www/wwwroot/www.010fusheng.com/config/database.php |
domain_app.php | /www/wwwroot/www.010fusheng.com/cache/config/domain_app.php |
domain_client.php | /www/wwwroot/www.010fusheng.com/cache/config/domain_client.php |
hooks.php | /www/wwwroot/www.010fusheng.com/config/hooks.php |
index.php | /www/wwwroot/www.010fusheng.com/index.php |
lang.php | /www/wwwroot/www.010fusheng.com/api/language/zh-cn/lang.php |
rewrite.php | /www/wwwroot/www.010fusheng.com/config/rewrite.php |
site.php | /www/wwwroot/www.010fusheng.com/cache/config/site.php |
system.php | /www/wwwroot/www.010fusheng.com/cache/config/system.php |
template_pc_default_home_article_article.html.cache.php | /www/wwwroot/www.010fusheng.com/cache/template/template_pc_default_home_article_article.html.cache.php |
template_pc_default_home_footer.html.cache.php | /www/wwwroot/www.010fusheng.com/cache/template/template_pc_default_home_footer.html.cache.php |
template_pc_default_home_head.html.cache.php | /www/wwwroot/www.010fusheng.com/cache/template/template_pc_default_home_head.html.cache.php |
template_pc_default_home_searchBox.html.cache.php | /www/wwwroot/www.010fusheng.com/cache/template/template_pc_default_home_searchBox.html.cache.php |
AutoloadConfig.php | SYSTEMPATH/Config/AutoloadConfig.php |
Autoloader.php | SYSTEMPATH/Autoloader/Autoloader.php |
BaseBuilder.php | SYSTEMPATH/Database/BaseBuilder.php |
BaseCollector.php | SYSTEMPATH/Debug/Toolbar/Collectors/BaseCollector.php |
BaseConfig.php | SYSTEMPATH/Config/BaseConfig.php |
BaseConnection.php | SYSTEMPATH/Database/BaseConnection.php |
BaseHandler.php | SYSTEMPATH/Cache/Handlers/BaseHandler.php |
BaseResult.php | SYSTEMPATH/Database/BaseResult.php |
BaseService.php | SYSTEMPATH/Config/BaseService.php |
Builder.php | SYSTEMPATH/Database/MySQLi/Builder.php |
CacheFactory.php | SYSTEMPATH/Cache/CacheFactory.php |
CacheInterface.php | SYSTEMPATH/Cache/CacheInterface.php |
CliRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/CliRenderer.php |
CloneableCookieInterface.php | SYSTEMPATH/Cookie/CloneableCookieInterface.php |
CodeIgniter.php | SYSTEMPATH/CodeIgniter.php |
Common.php | SYSTEMPATH/Common.php |
Config.php | SYSTEMPATH/Config/Config.php |
Config.php | SYSTEMPATH/Database/Config.php |
Connection.php | SYSTEMPATH/Database/MySQLi/Connection.php |
ConnectionInterface.php | SYSTEMPATH/Database/ConnectionInterface.php |
ContentSecurityPolicy.php | SYSTEMPATH/HTTP/ContentSecurityPolicy.php |
Controller.php | SYSTEMPATH/Controller.php |
Cookie.php | SYSTEMPATH/Cookie/Cookie.php |
CookieInterface.php | SYSTEMPATH/Cookie/CookieInterface.php |
CookieStore.php | SYSTEMPATH/Cookie/CookieStore.php |
Database.php | SYSTEMPATH/Database/Database.php |
Database.php | SYSTEMPATH/Debug/Toolbar/Collectors/Database.php |
DebugToolbar.php | SYSTEMPATH/Filters/DebugToolbar.php |
DotEnv.php | SYSTEMPATH/Config/DotEnv.php |
Escaper.php | SYSTEMPATH/ThirdParty/Escaper/Escaper.php |
Events.php | SYSTEMPATH/Debug/Toolbar/Collectors/Events.php |
Events.php | SYSTEMPATH/Events/Events.php |
Exceptions.php | SYSTEMPATH/Debug/Exceptions.php |
Factories.php | SYSTEMPATH/Config/Factories.php |
Factory.php | SYSTEMPATH/Config/Factory.php |
FileHandler.php | SYSTEMPATH/Cache/Handlers/FileHandler.php |
FileLocator.php | SYSTEMPATH/Autoloader/FileLocator.php |
Files.php | SYSTEMPATH/Debug/Toolbar/Collectors/Files.php |
FilterInterface.php | SYSTEMPATH/Filters/FilterInterface.php |
Filters.php | SYSTEMPATH/Filters/Filters.php |
Header.php | SYSTEMPATH/HTTP/Header.php |
IncomingRequest.php | SYSTEMPATH/HTTP/IncomingRequest.php |
Kint.php | SYSTEMPATH/ThirdParty/Kint/Kint.php |
Logger.php | SYSTEMPATH/Log/Logger.php |
LoggerInterface.php | SYSTEMPATH/ThirdParty/PSR/Log/LoggerInterface.php |
Logs.php | SYSTEMPATH/Debug/Toolbar/Collectors/Logs.php |
Message.php | SYSTEMPATH/HTTP/Message.php |
MessageInterface.php | SYSTEMPATH/HTTP/MessageInterface.php |
MessageTrait.php | SYSTEMPATH/HTTP/MessageTrait.php |
Modules.php | SYSTEMPATH/Modules/Modules.php |
Query.php | SYSTEMPATH/Database/Query.php |
QueryInterface.php | SYSTEMPATH/Database/QueryInterface.php |
Renderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/Renderer.php |
RendererInterface.php | SYSTEMPATH/View/RendererInterface.php |
Request.php | SYSTEMPATH/HTTP/Request.php |
RequestInterface.php | SYSTEMPATH/HTTP/RequestInterface.php |
RequestTrait.php | SYSTEMPATH/HTTP/RequestTrait.php |
Response.php | SYSTEMPATH/HTTP/Response.php |
ResponseInterface.php | SYSTEMPATH/HTTP/ResponseInterface.php |
ResponseTrait.php | SYSTEMPATH/API/ResponseTrait.php |
ResponseTrait.php | SYSTEMPATH/HTTP/ResponseTrait.php |
Result.php | SYSTEMPATH/Database/MySQLi/Result.php |
ResultInterface.php | SYSTEMPATH/Database/ResultInterface.php |
RichRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/RichRenderer.php |
RouteCollection.php | SYSTEMPATH/Router/RouteCollection.php |
RouteCollectionInterface.php | SYSTEMPATH/Router/RouteCollectionInterface.php |
Router.php | SYSTEMPATH/Router/Router.php |
RouterInterface.php | SYSTEMPATH/Router/RouterInterface.php |
Routes.php | SYSTEMPATH/Config/Routes.php |
Routes.php | SYSTEMPATH/Debug/Toolbar/Collectors/Routes.php |
Services.php | SYSTEMPATH/Config/Services.php |
TextRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/TextRenderer.php |
Timer.php | SYSTEMPATH/Debug/Timer.php |
Timers.php | SYSTEMPATH/Debug/Toolbar/Collectors/Timers.php |
Toolbar.php | SYSTEMPATH/Debug/Toolbar.php |
URI.php | SYSTEMPATH/HTTP/URI.php |
UserAgent.php | SYSTEMPATH/HTTP/UserAgent.php |
Utils.php | SYSTEMPATH/ThirdParty/Kint/Utils.php |
View.php | SYSTEMPATH/Config/View.php |
View.php | SYSTEMPATH/View/View.php |
Views.php | SYSTEMPATH/Debug/Toolbar/Collectors/Views.php |
init.php | SYSTEMPATH/ThirdParty/Kint/init.php |
init_helpers.php | SYSTEMPATH/ThirdParty/Kint/init_helpers.php |
url_helper.php | SYSTEMPATH/Helpers/url_helper.php |
Directory: | |
Controller: | \Phpcmf\Control\Show |
Method: | index |
Params: | 0 / 0 |
Method | Route | Handler |
---|---|---|
GET | / | \Phpcmf\Control\Show::index |
HEAD | / | \Phpcmf\Control\Show::index |
POST | / | \Phpcmf\Control\Show::index |
PUT | / | \Phpcmf\Control\Show::index |
DELETE | / | \Phpcmf\Control\Show::index |
OPTIONS | / | \Phpcmf\Control\Show::index |
TRACE | / | \Phpcmf\Control\Show::index |
CONNECT | / | \Phpcmf\Control\Show::index |
CLI | migrations/([^/]+)/([^/]+) | \CodeIgniter\Commands\MigrationsCommand::$1/$2 |
CLI | migrations/([^/]+) | \CodeIgniter\Commands\MigrationsCommand::$1 |
CLI | migrations | \CodeIgniter\Commands\MigrationsCommand::index |
CLI | ci(.*) | \CodeIgniter\CLI\CommandRunner::index/$1 |
CLI | / | \Phpcmf\Control\Show::index |
Time | Event Name | Times Called |
---|---|---|
9.21 ms | pre_system | 1 |
0.09 ms | dbquery | 7 |
Action | Datetime | Status | Method | URL | Content-Type | Is AJAX? |
---|---|---|---|---|---|---|
2025-04-10 00:07:22 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:07:04 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:47 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:40 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:39 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:36 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:34 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:32 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:27 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:06:22 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:05:19 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:05:05 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:04:55 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:04:10 | 200 | GET | http://m.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:03:46 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:03:44 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:03:41 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:03:36 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:03:35 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-10 00:03:33 | 200 | GET | http://www.010fusheng.com/index.php/ | text/html; charset=UTF-8 | No |
Session doesn't seem to be active.
c | show |
id | 527 |
m | index |
Accept-Encoding | gzip, deflate |
Accept | text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7 |
User-Agent | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) |
Upgrade-Insecure-Requests | 1 |
Cache-Control | no-cache |
Pragma | no-cache |
Connection | keep-alive |
Host | www.010fusheng.com |
Accept-Encoding | gzip, deflate |
Accept | text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7 |
User-Agent | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) |
Upgrade-Insecure-Requests | 1 |
Cache-Control | no-cache |
Pragma | no-cache |
Connection | keep-alive |
Host | www.010fusheng.com |
CodeIgniter Version: | 4.1.4 |
PHP Version: | 7.3.31 |
PHP SAPI: | fpm-fcgi |
Environment: | development |
Base URL: | http://www.010fusheng.com/ |
Timezone: | PRC |
Locale: | en |
Content Security Policy Enabled: | No |